Anest Iwata ISP 500B
$3,850
• air-cooled, oil-free scroll-type vacuum
• low noise & vibration
• compact design
• no lubricant maintenance or sealing water administration
• free from installation restrictions
• low power consumption
This pump is refurbished and up to manufacturer standards. Comes with a 6 month warranty.
| Peak speed @ 60 Hz | 21.2 cfm |
| Ultimate pressure | 7.5 x 10-3 Torr |
| Max. inlet pressure | 1.0 atmosphere |
| Max. outlet pressure | 1.1 atmosphere |
| Inlet connection | NW 40 |
| Exhaust connection | NW 25 |
| Operating temp. | 41 to 104 F |
| Motor hp | 0.8 kW |
| Operating voltages @ 60 Hz | |
| Single-phase | 110/230 VAC |
| Three-phase | 200/460 VAC |
| Operating speed @ 60 Hz | 1,725 rpm |
| Cooling system | Air-cooled |
| Weight | 84 lbs |
| Noise level | 68 dB(A) |
| Zip Code (Item Location) | 95112 |
|---|---|
| Item Location | US |
| Condition (eBay) | Seller refurbished |
Only logged in customers who have purchased this product may leave a review.
AVAILABILITY: In stock
MKS Sensor Model number 750B12TCB26C
Item is in used, but excellent condition.
Call us for additional details
AVAILABILITY: In stock
The 200 amu residual gas analyzers from SRS offer exceptional performance and value. These RGA’s provide detailed gas analysis of vacuum systems at about half the price of competitive models. Each RGA system comes complete with a quadrupole probe, electronics control unit (ECU), and a real-time Windows software package that is used for data acquisition and analysis, as well as probe control.
Specifications
Operational
| Mass Range: | |
| RGA200 | 1 to 200 amu |
| Mass filter type | Quadrupole
(Cylindrical rods, rod diameter: 0.25”, rod length: 4.5”) |
| Detector type | Faraday cup (FC) – standard
Electron multiplier (CDEM) – optional |
| Resolution
(per AVS standard 2.3). |
Better than 0.5 amu @ 10% peak height
Adjustable to constant peak width throughout the entire mass range. |
| Sensitivity (A/Torr)* | 2.10-4 (FC)
<200 (CDEM). User adjustable throughout high voltage range. |
| Minimum detectable
partial pressure (MDPP)* |
5.10-11 Torr (FC).
5.10-14 Torr (CDEM). |
| Operating pressure range | 10-4 Torr to UHV (FC)
10-6 Torr to UHV (CDEM) |
| Max. bakeout temperature (without
ECU) |
300qC |
| Operating Temperature | 70qC (max.) |
| Recommended bakeout temperature | 200°C (O100HJR Heater Jacket recommended) |
| Total press.
measurement |
Available with FC measurements only |
* Measured with N2 @ 28 amu with 1 amu full peak width @ 10% height, 70 eV electron energy, 12 eV ion energy and 1 mA electron emission current. Ionizer
| Design | Open ion source, cylindrical symmetry. |
| Operation | Electron impact ionization. |
| Material | Stainless steel, type 304. |
| Filament | Thoriated Iridium (dual) with firmware protection. Field |
AVAILABILITY: In stock
• air-cooled, oil-free scroll-type vacuum
• low noise & vibration
• compact design
• no lubricant maintenance or sealing water administration
• free from installation restrictions
• low power consumption
AVAILABILITY: In stock
The Brooks CTI-Cryogenics 8510 Low Voltage Compressor, for Use with On-Board® High-Vacuum
Pumps and/or Cryo-Torr Cryogenic Pumps
Brooks CTI-Cryogenics 8510 Helium Compressor - REBUILT OEM Part Numbers: 8031400G002
AVAILABILITY: In stock
Reviews
There are no reviews yet.