CTI 8510 Compressor
$4,500 $3,800
The Brooks CTI-Cryogenics 8510 Low Voltage Compressor, for Use with On-Board® High-Vacuum
Pumps
Brooks CTI-Cryogenics 8510 Helium Compressor - REBUILT OEM Part Numbers: 8031400G002
Refurbished and ready to go! Call us for details and Warranty Information.
Only logged in customers who have purchased this product may leave a review.
CTI 8303 Compressor. This is a series 8300 Compressor and can be outfitted to match the specifications of most 8300 series models. Call us for your specific needs. Unit can optionally be configured with either an 8001 or and 8004 Controller for an additional cost.
Image is not of the exact unit for sale, but represents the unit that will be sold.
Rebuilt Brooks CTI-Cryogenics 8300 Helium Compressor
OEM Part Numbers this unit can be configured to meet:
8052005 water cooled
AVAILABILITY: In stock
The 200 amu residual gas analyzers from SRS offer exceptional performance and value. These RGA’s provide detailed gas analysis of vacuum systems at about half the price of competitive models. Each RGA system comes complete with a quadrupole probe, electronics control unit (ECU), and a real-time Windows software package that is used for data acquisition and analysis, as well as probe control.
Specifications
Operational
| Mass Range: | |
| RGA100 | 1 to 200 amu |
| Mass filter type | Quadrupole
(Cylindrical rods, rod diameter: 0.25”, rod length: 4.5”) |
| Detector type | Faraday cup (FC) – standard
Electron multiplier (CDEM) – optional |
| Resolution
(per AVS standard 2.3). |
Better than 0.5 amu @ 10% peak height
Adjustable to constant peak width throughout the entire mass range. |
| Sensitivity (A/Torr)* | 2.10-4 (FC)
<200 (CDEM). User adjustable throughout high voltage range. |
| Minimum detectable
partial pressure (MDPP)* |
5.10-11 Torr (FC).
5.10-14 Torr (CDEM). |
| Operating pressure range | 10-4 Torr to UHV (FC)
10-6 Torr to UHV (CDEM) |
| Max. bakeout temperature (without
ECU) |
300qC |
| Operating Temperature | 70qC (max.) |
| Recommended bakeout temperature | 200°C (O100HJR Heater Jacket recommended) |
| Total press.
measurement |
Available with FC measurements only |
* Measured with N2 @ 28 amu with 1 amu full peak width @ 10% height, 70 eV electron energy, 12 eV ion energy and 1 mA electron emission current. Ionizer
| Design | Open ion source, cylindrical symmetry. |
| Operation | Electron impact ionization. |
| Material | Stainless steel, type 304. |
| Filament | Thoriated Iridium (dual) with firmware protection. Field |
AVAILABILITY: In stock
Item is used and is locked up. Great unit for parts or a rebuild project! Call today if you are interested.
AVAILABILITY: In stock
MKS Sensor Model number 750B12TCB26C
Item is in used, but excellent condition.
Call us for additional details
AVAILABILITY: In stock
AVAILABILITY: In stock
Specifications:
| Mass | 65 kg |
| Minimum cooling water flow | 75 l.h-1 |
| Oil capacity | |
| Coupling cover | 1.5 l |
| Shaft seal reservoir | 0.125 l |
| Rotational speed | |
| 50 Hz | 2,900 r.min-1 |
| 60 Hz | 3,500 |
| Ult. pressure w/o gas ballast, permanent gases | 8 x 10-4 / 8 x 10-2Pa |
| Pressure differential across pump determined by the hydrokinetic drive | 180 mbar / 1.8 x 10-4 Pa |
| Recommended backing-pump | QDP40 or QDP80 |
| Vacuum connections | |
| Inlet connection | ISO63 bolted |
| Outlet connection | ISO40 bolted |
| Cooling water connections | |
| Inlet (BSP) | 3/8 inch male |
| Outlet (BSP) | 3/8 inch female |
| Noise level | 66 dB(A) |
Unit can be reconfigured into these OEM Model Numbers: A301-86-905
AVAILABILITY: In stock
Brooks CTI-Cryogenics 9600 Helium Compressor - REBUILT by HVS! Reconfigurable to these Manufacturer OEM Numbers: 8135900G001 low voltage 8135908G001 low voltage
AVAILABILITY: In stock
AVAILABILITY: In stock
Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise.
Vacuum Gauge Modules
Vacuum pressure measurements over seven decades from atmosphere to 1×10-4 Torr (1×10-4 mbar, 1×10-2 Pa) are provided by Granville-Phillips Mini-Convectron Modules. Versions are available with analog output, RS-485 interface, or with DeviceNet™ interface (described in a separate brochure). The basic versions have adjustable setpoint relays that allow you to control other functions of your vacuum process or provide safety interlocking. The digital display version features a bright, 3-digit display that gives instantaneous on-site pressure measurement. A version with a convenient linear analog output signal is also available.
Convectron Gauge Technology
With over 20 years of successful field installations, the Granville-Phillips Convectron® Gauge has become an industry standard. It is a unique variation of
thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges,
Convectron Gauges take advantage of heat loss due to convection cooling at higher pressures. This extends the range of accurate, repeatable vacuum measurements
to atmosphere. To assure the highest level of accuracy and gauge-to-gauge repeatability, each Convectron Gauge is individually calibrated at our factory.
Convectron Gauges are in use today on hundreds of thousands of vacuum processes throughout the world, making them a wise choice for many vacuum applications.
AVAILABILITY: In stock
Reviews
There are no reviews yet.