Varian PTS06001INV Triscoll 600 Dry Scroll Vacuum Pump – Refurbished
$4,500 $4,000
Unit has been refurbished by Seller and is ready to go! Call for additional details or configuration options.
General Information
Agilent (Varian) TriScroll 600 series pumps are designed to provide years of trouble-free service if maintenance
procedures and intervals are observed. Bearing grease replenishment and tip seal replacement are
recommended when the pump base pressure has risen to an unacceptably high level for your
application. Bearings, rotary seals and O-rings should also be replaced if the pump exhibits humming
or grinding noises from the bearings. Main bearing life may be shortened if your application requires
the pumping of high quantities of water vapor. Use of the bearing purge will keep this water from
impacting bearing life.
Required Equipment
❑ Maintenance Tool Kit: PTSS0600TK (page 2)
❑ Major Maintenance Kit: PTSS0600MK (page 4)
❑ Arbor Press: 1/2 ton or larger, 10″ work diameter capacity, 8″ capacity over table
❑ Oven: 400 o
F temperature capability, 11″ wide x 11″ deep x 4″ high minimum chamber,
500 watt or higher heating capacity
❑ Heat Resistant Surface
❑ Vacuum Gauge: Capable of measuring pressure of 5 mTorr to 20 mTorr with an accuracy of
± 1 mTorr. A capacitance manometer or Pirani gauge is recommended.
Condition (eBay) | Seller refurbished |
---|---|
Item Location | US |
Zip Code (Item Location) | 95112 |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Only logged in customers who have purchased this product may leave a review.
Write a review- 8100
- Adixen
- Anest Iwata
- Axcelis
- Chiller
- compressor
- Consulting
- Cooling
- cryo
- cryogenic
- cryopump
- CTI
- dry
- Dry Pump
- Dry Scroll
- E2M40
- E2M80
- Edwards
- granville-phillips
- GVSP30
- Leybold
- M40
- M80
- M and W
- MFC
- MKS
- NT20
- NT20 Interface Cable to Turbo
- OB 8
- On board
- Pfeiffer
- PTS 300
- PTS 600
- pump
- Residual Gas Analyzer
- RGA200
- sensor
- SRS
- Stanford Research Systems
- surplus
- Turbo
- Unit
- vacuum
- Vacuum Pump
- Varian
Related Products
• air-cooled, oil-free scroll-type vacuum
• low noise & vibration
• compact design
• no lubricant maintenance or sealing water administration
• free from installation restrictions
• low power consumption
1 in stock
The 200 amu residual gas analyzers from SRS offer exceptional performance and value. These RGA’s provide detailed gas analysis of vacuum systems at about half the price of competitive models. Each RGA system comes complete with a quadrupole probe, electronics control unit (ECU), and a real-time Windows software package that is used for data acquisition and analysis, as well as probe control.
Specifications
Operational
Mass Range: | |
RGA200 | 1 to 200 amu |
Mass filter type | Quadrupole
(Cylindrical rods, rod diameter: 0.25”, rod length: 4.5”) |
Detector type | Faraday cup (FC) – standard
Electron multiplier (CDEM) – optional |
Resolution
(per AVS standard 2.3). |
Better than 0.5 amu @ 10% peak height
Adjustable to constant peak width throughout the entire mass range. |
Sensitivity (A/Torr)* | 2.10-4 (FC)
<200 (CDEM). User adjustable throughout high voltage range. |
Minimum detectable
partial pressure (MDPP)* |
5.10-11 Torr (FC).
5.10-14 Torr (CDEM). |
Operating pressure range | 10-4 Torr to UHV (FC)
10-6 Torr to UHV (CDEM) |
Max. bakeout temperature (without
ECU) |
300qC |
Operating Temperature | 70qC (max.) |
Recommended bakeout temperature | 200°C (O100HJR Heater Jacket recommended) |
Total press.
measurement |
Available with FC measurements only |
* Measured with N2 @ 28 amu with 1 amu full peak width @ 10% height, 70 eV electron energy, 12 eV ion energy and 1 mA electron emission current. Ionizer
Design | Open ion source, cylindrical symmetry. |
Operation | Electron impact ionization. |
Material | Stainless steel, type 304. |
Filament | Thoriated Iridium (dual) with firmware protection. Field |
1 in stock
On-Board® Cryopumps
The Brooks CTI-Cryogenics On-Board cryogenic vacuum pumps speed integration and improve system operation is the world standard for reliability and performance. Delivering superior up-time, On-Board cryopumps and consistent performance, with fully integrated controls and supporting peripherals, deliver superior up-time to increase overall tool productivity and up-time.
Key Features
- Fast Regen™ capability that extends cryopump performance between regenerations
- Simultaneous regeneration capability, enabled by networking your cryopumps, that speeds overall system regeneration
- An embedded microprocessor control to enhance performance, perform diagnostic routines and provide communication capability
- Sophisticated software and easy-to-use graphical user interfaces to significantly improve performance and operation
1 in stock
• air-cooled, oil-free scroll-type vacuum
• low noise & vibration
• compact design
• no lubricant maintenance or sealing water administration
• free from installation restrictions
• low power consumption
1 in stock
2 in stock
Reviews
There are no reviews yet.